![background image](http://html.mh-extra.com/html/sony/srs-x2/srs-x2_installation-manual_391136001.webp)
Installation manual
1. Mount parts on PCB (including main board & jack PCB)
Main board: top side
Main board: bottom side
For a module with print circuit board antenna, to eliminate the influence from other components or ground,
a clearance area around the print circuit board antenna is necessary, please refer to following picture. In
this area, there should be no metal in it. Besides x-y-axis, there should also be no metal at the Z-axis
direction.
Summary of Contents for SRS-X2
Page 6: ......