SRS-GD50iP
4
1
four screws
(BVTP3
u
8)
3
bottom cover
8
MAIN board
7
wire (flat type)
(15
core)
(CN100)
6
wire (flat type) (40 core)
(CN505)
5
rear cover
4
two screws
(P2.6
u
6)
2
two screws
(P2
u
5)
Note 2:
Inserts until matching
rear cover to jack and
bumping.
Note 3:
MAIN board block is lowered while
putting the headphone jack in the hole
of top cover assy.
Note 4:
MAIN board must gotten
on the stepped section.
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
Note:
Follow the disassembly procedure in the numerical order given.
2-2. MAIN BOARD (CONTROL BOX)
Note 1:
This illustration sees the set from bottom side.
SET
2-2. MAIN BOARD (CONTROL BOX)
(Page
4)
2-3. LED BOARD (CONTROL BOX)
(Page
5)
2-4. DOCK BOARD (CONTROL BOX)
(Page
6)
