55
Detailed Menu Description
C
h
a
p
te
r 5
M
e
nu
It
em
s
TC Menu
The TC menu allows you to set all of the items related to
time codes from a single menu.
Button
Indication
Setting
Target
[F1]
TCG SRC
Selects whether to synchronize the internal time code generator with the external
signal.
preset
ext-LTC
SDI-LTC
SDI-VITC
In
[F2]
REGENE
Selects the signal to regenerate when the time code generator is in regenerate
mode.
TC & UB:
Regenerates both the time code signal and user bit signal.
TC:
Regenerates only the time code signal.
UB:
Regenerates only the user bit signal.
In
[F3]
RUN
Selects the running mode of the time code generator.
Free:
The time code advances when the power is on regardless of the unit’s
operation mode.
Rec:
The time code advances only during recording.
In
[F4]
DF/NDF
Selects the drop frame mode of the time code generator or timer counter.
DF:
Drop frame mode
NDF:
Non-drop frame mode
Notes
• This setting is only enabled when the frame frequency of the unit is 29.97 Hz or
59.94 Hz.
• This setting is only valid when
[F1]
(TCG SRC) is set to “preset.”
I/O
[F5]
TM SEL
Selects the time data to display on the display. To switch between VITC and LTC,
press the
[F10]
(TCR SEL) button.
TC
UB
TM1
TM2
I/O
[F7]
TM RESET
Resets the time counter.
I/O
[F8]
TM SET
Inputs time data.
I/O
[F9]
TM HOLD
The time counter is temporarily stopped while the button is pressed.
Out
[F10]
TCR SEL
Sets the value read by the time code reader.
LTC
VITC
Out
ALT/
[F2]
TC
CONV
Sets time code conversion when playing files recorded in a different frame
frequency.
Out
[F1]
STRT TC
Sets the Starting TC when converting the time code.
Out
[F2]
ENTRY
Sets the current Original time code as the Starting TC when converting time codes. Out
[F3]
JUMP TC
Sets a midway point when the time code is being converted in a positive or negative
direction based on the Starting TC.
Out
[F4]
CONV
Sets whether to convert the time code.
Off:
Does not convert the time code.
On:
Converts the time code.
Out
[F10]
EXIT
Returns to the original menu.
–
