SYSTEM Setup Menu
58
Chap
te
r 5
Men
u Det
ail
s
PB FUNCTION
IN POINT
Specifies time codes for setting the time data (IN points)
used for cuing.
When an IN point is set, the IN point is displayed in
“IN:XX:XX:XX:XX” format in the time data indication
of the HOME screen.
For details on cuing using IN points, see “Cuing via Time
Code Entry (IN Points)” (page 37).
PB CONTINUE
Specifies whether to enable continuous playback of files.
OFF [Off]:
Disables continuous playback of files (i.e.,
performs single file playback).
LIST [List]: Plays back files continuously according to
the sort sequence in the “FILE LIST.”
REPEAT
Specifies whether to enable repeat playback.
OFF [Off]:
Disables repeat playback.
ON [On]: Enables repeat playback.
Tip
The range for repeat playback is determined by the “PB
CONTINUE” setting.
REC REVIEW
During REC PAUSE, this specifies the REC REVIEW
playback range for when the ASSIGN button is pressed on
the F65 or when the PLAY button is pressed on the control
panel while holding down the FUNC button.
ALL [All]:
Plays back the last recorded file from
beginning to end.
5SEC [5sec]: Plays back the last 5 seconds of the last
recorded file.
FUNC MODE
Selects the operation performed when a file is opened via
NEXT/PREV or the FILE LIST.
PAUSE [Play Pause]:
Opens the file in the PLAY
PAUSE state.
PLAY [Play]: Opens the file in the PLAY state.
NEXT/PREV
Specifies whether to include MARK IN points as
destinations for NEXT/PREV operations using the
FFWD/REW button.
T+MK [MarkIn]:
Includes MARK IN points.
Top [FileTop]: Excludes MARK IN points.
Setting Item
Settings
