Set
ting wit
h th
e
Re
mot
e
C
o
nt
rolle
r
56
PAN TILT ZOOM Menu
• Depending on the installation conditions, the image
stabilizer may not be effective.
• When the image stabilizer function is enabled, the
subject appears closer.
• The image stabilizer may not be effective in an
installation environment where high frequency
vibration is present. In this case, set the image
stabilizer function to OFF.
PAN TILT ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/
tilt/zoom mode.
You can also set via a Web browser.
See “PTZF control Tab” on page 42.
PAN/TILT LIMIT (pan/tilt limit)
When you set PAN/TILT LIMIT to ON, you can select
the limit of pan/tilt operation. You can select the
following values:
RIGHT:
–169° to +170°, selectable in 1° steps.
LEFT:
–170° to +169°, selectable in 1° steps.
UP:
–19° to +90° (Eflip: OFF)
–89° to +20° (Eflip: ON) selectable in 1° steps.
DOWN:
–20° to +89° (Eflip: OFF)
–90° to +19° (Eflip: ON) selectable in 1° steps.
Notes
• The display of setting value is updated after the
operation. The display does not change during
panning/tilting.
• The limit of pan/tilt operation becomes effective
promptly after you set the range of PAN/TILT LIMIT.
• When set to OFF, the setting is returned to the factory
setting.
• When turning on the power after turning it off, the
latest settings becomes effective.
• When switching the Eflip function ON/OFF, the
setting is returned to the factory setting. Set the Eflip
function setting in accordance with the installation
condition of the camera and select the value.
