S
e
tting
th
e
Came
ra
V
ia a Net
w
o
rk
42
Setting the PTZF control — PTZF control Menu
Setting the PTZF control
— PTZF control Menu
When you click
in the Administrator menu,
the PTZF control menu appears.
The PTZF control menu consists of the
PTZF control
,
Preset position
, and
Serial
tabs.
PTZF control Tab
You can also set from the remote controller.
See “PAN TILT ZOOM Menu” on page 56.
PTZ mode
Set the pan/tilt control mode using the 8-direction arrow
buttons (page 16) and the zoom control mode using the
/
buttons (page 16). Select
Normal
or
Step
.
Normal:
When you click the mouse button, the camera
starts panning, tilting or zooming, and the operation
continues while you hold down the mouse button. To
stop the operation, release the mouse button.
Step:
Each time you click the mouse button, the camera
moves (pans, tilts or zooms). If you keep the mouse
button held down for more than 1 second, the
operation mode is temporarily changed to
Normal
.
When you release the mouse button, camera
operation stops and the
Step
mode is restored.
When you select
Step
,
Pan/Tilt level
and
Zoom level
are selectable.
Pan/Tilt level:
Select the camera transition level from
1
to
10
by clicking the 8-direction arrow buttons for
panning/tilting. Selecting
10
provides the maximum
transition level.
Zoom level:
Select the camera transition level from
1
to
10
by clicking
/
for zooming. Selecting
10
provides the maximum transition level.
Digital zoom
Select On/Off of the digital zoom.
On:
An image can be zoomed up to 30× optical zoom
and 12× digital zoom, 360× zoom in total.
Off:
An image can be zoomed up to 30× optical zoom.
Digital zoom (only SRG-201SE)
Select On/Off of the digital zoom.
On:
An image can be zoomed up to 20
×
optical zoom
and 12
×
digital zoom, 240
×
zoom in total.
Off:
An image can be zoomed up to 20
×
optical zoom.
Focus mode
Select the focus mode.
Auto:
The focus is automatically adjusted.
Manual:
The focus can be adjusted by using the
,
and
buttons of the control panel
displayed in the main viewer.
Slow Pan-Tilt mode
When set to
Slow Pan-Tilt mode
for the panning/tilting,
select
On
.
Focus near limit
Set the range at which to automatically focus. If a
subject is nearer than the set range, it will not be
focused.
Pan-Tilt limit
When you check the checkbox, it limits the panning/
tilting range. You can select the following values:
Left:
–170° to 169°, selectable in 1° steps.
Right: –169° to 170°, selectable in 1° steps.
Up:
–19° to 90° (Eflip: OFF)
–89° to 20° (Eflip: ON), selectable in 1° steps.
Down: –20° to 89° (Eflip: OFF)
–90° to 19° (Eflip: ON), selectable in 1° steps.
Note
When switching the Eflip function On/Off, the setting is
returned to the factory setting. Set the Eflip function
setting in accordance with the installation condition of
the camera and select the value.
Setting the range of the UP/DOWN movement
PTZF control
(Eflip: OFF)
(Eflip: ON)
20°
0°
–90°
90°
–
20°
0°
