7
21CH
40CH
1CH
2CH
3CH
39CH
40CH
20CH
19CH
. . .
BASE UNIT
[Setting the Test Mode]
1. Power on with pressing the
[HANDSET LOCATOR]
key for two seconds.
2. CHARGE and LINE LEDs turn on for 50 msec, and the test mode is set.
*
If setting the test mode with the status that
[TONE]
position is selected at
[DIAL MODE]
switch
, the unit cold stars next time when the
power is turned on.
[Releasing the Test Mode]
To release the test mode, perform as follows:
• Turn the power off (disconnect the AC adapter plug).
• Set the handset to charge on the base unit (except Test Mode 9).
• Bell in.
[Changing the Test Mode Step]
1. Set the
[DIAL MODE]
switch to the
[PULSE]
position.
2. Press the
[HANDSET LOCATOR]
key.
3. A step is changed each time the key is pressed, and CHARGE and LINE LEDs turn on for 50 msec.
[Changing the Channel]
1. Set the
[DIAL MODE]
switch to the
[TONE]
position.
2. Press the
[HANDSET LOCATOR]
key.
3. A channel is changed each time the key is pressed, and CHARGE and LINE LEDs turn on for 50 msec.
*
Channel will be back to initial channel (19CH), when the test mode step is changed.
• Channel Rotation
SECTION 3
TEST MODE
