To set up your SmartBand Talk using Bluetooth®
1
Make sure that your SmartBand Talk has been charged for at least 30 minutes.
2
Android™ device:
Make sure that you have installed or updated the SmartBand
Talk application to the latest version.
3
Turn on your SmartBand Talk.
4
Android™ device:
Turn on the Bluetooth® function, then scan for Bluetooth®
devices and select
SWR30
in the list of available devices.
5
Android™ device:
Follow the instructions that appear on the screen. appears
briefly in the status bar and permanently in the Notification panel when a
connection with the SmartBand Talk is active.
You can drag down the status bar to open the Notification panel and get quick access to the
SmartBand application and the Lifelog application.
To install the SmartBand Talk application
1
From the main application screen of your Android™ device, find and tap
Play
Store
to open the
Google Play™
application.
2
Tap the search icon, then search for “SmartBand Talk”.
3
After the search results appear, tap
SmartBand™ Talk
, then follow the relevant
instructions to download and install the application.
You can only install the
SmartBand™ Talk
application on an Android™ device, for example, an
Android™ smartphone or tablet.
Reconnecting your SmartBand Talk
In cases where a connection gets lost, for example, when the connected Android™
device goes out of range, your SmartBand Talk automatically performs a series of
reconnection attempts. When this happens, you can use the function key to force the
accessory to try reconnecting, or you can use NFC to reconnect the two devices.
To force the SmartBand Talk to try reconnecting
•
Press the function key.
To reconnect your SmartBand Talk using NFC
1
Android™ device:
Make sure that the NFC function is turned on and that the
screen is active and unlocked.
2
Place the Android™ device over your SmartBand Talk so that the NFC
detection area of each device touches the other.
Resetting your SmartBand Talk
Reset your SmartBand Talk if it behaves unexpectedly or if you want to connect it to
a new device.
To perform a factory data reset
1
Turn off your SmartBand Talk.
2
Press and hold down the power key, volume up and down keys simultaneously
until you feel three short vibrations followed by one longer vibration, then
release the keys.
You need to pair the SmartBand Talk with your Android™ device again.
To force your SmartBand Talk to shut down
•
Long press the power key.
8
This is an Internet version of this publication. © Print only for private use.
