100
Troubleshooting
Cana
l Plus
You cannot set the
channel as the Canal Plus
in the REGLAGE DES
CHAINES menu.
• Check that DECODEUR/LIGNE3 in the OPTIONS-2
menu is set to DECODEUR (see page 91).
You cannot watch the
Canal Plus programme
when the VCR is in
standby mode.
• Check that DECODEUR/LIGNE3 in the OPTIONS-2
menu is set to DECODEUR (see page 91).
• Make sure the Canal Plus Scart cable is plugged securely.
• Check that VEILLE ECO in the OPTIONS-2 menu is set to
PARTIELLE or NON (see page 92).
The Canal Plus
programme is always
recorded scrambled.
• Make sure the Canal Plus Scart cable is plugged securely.
• Check that DECODEUR/LIGNE3 in the OPTIONS-2
menu is set to DECODEUR (see page 91).
• Check that this channel is set as Canal Plus in the
REGLAGE DES CHAINES menu (see page 47).
Se
t-T
op
Bo
x
con
tr
o
l
The Set-Top Box control
function does not work
properly.
• Make sure you are pointing the remote commander only at
the remote sensor on the VCR and not at the STB sensor.
• Make sure you are pointing the STB controller at the
remote sensor on the Set-Top Box.
• Make sure the STB controller is connected securely.
• The STB tuner brand number may be deleted if you
disconnect it from the VCR. Re-enter the brand code
number corresponding to your Set-Top Box (see page 27).
You cannot watch the
STB picture when the
VCR is in standby mode
or recording standby
mode.
• Check that VEILLE ECO in the OPTIONS-2 menu is set to
PARTIELLE or NON (see page 92).
• Check that DECODEUR/LIGNE3 in the OPTIONS-2
menu is set to LIGNE3 (see page 91).
Symptom
Remedy
