background image

Additional Operations

SLV-X817/717ME/PS/SG     3-858-651-11 (1)

29

CLICK SHUTTLE ring

Using the CLICK SHUTTLE
ring (SLV-X717 only)

With the CLICK SHUTTLE ring,
you can operate a variety of
playback options.

During playback or pause, turn the
CLICK SHUTTLE ring clockwise or
anticlockwise.  Each change in the
CLICK SHUTTLE ring position changes the playback mode, and the
corresponding mark appears on the TV screen for a few seconds in the
following way if the on-screen display function is on:

Tip

• Adjust the picture using TR/– on the VCR if:

– streaks appear while playing in slow motion
– bands appear at the top or bottom while pausing
– the picture shakes while pausing.

Notes

• The playback sound is muted during these operations.
• In LP mode, noise may appear or there may be no colour.
• If the playback mode mark doesn’t appear on the TV screen, press DISPLAY.

Normal speed

X 2

X 2

X 1

Double speed

Slow motion

Double speed in
reverse

High speed in
reverse

Mark on the TV
screen

Playback mode

High speed

Slow motion in
reverse

pause

Normal speed in
reverse

Summary of Contents for SLV-X717ME















































Reviews: