SmartFile function
80
Recording using the SmartFile function
Recording using the SmartFile function
To use the SmartFile function, attach the SmartFile label to the spine of the cassette.
If you record a programme on a tape with a SmartFile label, for more than 20 minutes
in LP mode and 11 minutes in SP mode, programme data, such as the name, date and
channel, is automatically stored in the memory of the SmartFile label. Some stations
may not offer this service.
Attaching the SmartFile label to the cassette
To use the SmartFile function, attach the supplied
SmartFile label to the cassette. Remove any
staines or dirt from the surface of the spine of the
tape. Then, holding both edges of the SmartFile
label so that it doesn’t bend, attach it along the
guide line to the spine of the cassette. This tape is
henceforth referred to as a SmartFile tape.
Note on the purchase of SmartFile labels
• If you want to order additional SmartFile labels, contact your nearest Sony service facility.
Notes
• The SmartFile label is equipped with a memory chip. The memory chip may be damaged and
cannot be used when you:
- twist or fold the SmartFile label.
- remove the SmartFile label and re-attach it to a tape.
- attach more than one SmartFile label to a tape.
- attach some metal, or sticker which has metal, to the SmartFile label.
- write too strongly on the SmartFile label using a ballpoint pen or similar sharp instrument.
- disassemble or remodel a label.
• Do not leave the SmartFile label in a place subject to excessive dust or dirt, direct sunlight,
humidity, mildew, strong magnetism or near heat sources.
• If you attach the SmartFile label to a shorter tape than an E-30, the SmartFile function may
not work correctly.
SMARTFILE SENSOR
