28
Presetting channels
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. However, if the picture is not clear, you may also use the
manual tuning function.
Tuning the French CATV channels
This VCR can scan the CATV channels B to Q and the HYPER frequency
channels S21 to S41. On the REGLAGE DES CHAINES menu, the channels
are indicated by S01 to S44 REGLAGE CANAL numbers respectively. For
example, channel B is indicated by REGLAGE CANAL number S01 and
channel Q by REGLAGE CANAL number S23. (See the table below.)
If the CATV channel you want to preset is indicated by its frequency (for
example, 152.75 MHz), refer to the table below to find the corresponding
channel number. Channel number S05 is for this example.
1
Press /– or the programme number buttons to select the
programme position for which you cannot obtain a clear picture.
2
Press MENU, then select REGLAGES and press OK.
3
Select REGLAGE DES CHAINES, then press OK.
4
Select ACCORD FIN, then press OK.
The fine tuning meter appears.
5
Press
<
/
,
to get a clearer picture, then press MENU to exit the menu.
Note that the AFT (Auto Fine Tuning) setting switches to NON.
MENU
:
PROG.
NORME
L
C 2 7
NORMAL
NON
NORMAL / CABLE
REGLAGE CANAL
AFT
ACCORD FIN
RETOUR
REGLER :
SORTIE
4
REGLAGE DES CHAINES
TV-PAYANTE / CANAL+
Selected programme
position
