Sony SLV-SE430K Operating Instructions Manual Download Page 41

Page: 41 / 84

Playing a tape

asic Opera

tions

Starting playback automatically with one button (One
Touch Play) (not available on SLV-SE630N and SE430K)

If you use the SMARTLINK connection, you can turn on the TV, set the TV
to the video channel, and start playback automatically with one button.

Tip

• When there already is a tape in the VCR, press

to turn on the VCR first. When

you press

(play), the TV turns on, the TV is set to the video channel, and

playback starts automatically in one sequence.

Note

• When you use the One Touch Play function, leave the TV on or in the standby

mode.

Insert a tape.

The VCR automatically turns on.

If you insert a tape with its safety tab removed, the TV turns on and
switches to the video channel. Playback starts automatically.

Press

(play).

The TV turns on and switches to the video channel automatically.
Playback starts.

Summary of Contents for SLV-SE430K





















































































Search results

Summary of Contents for SLV-SE430K

Reviews:

Related manuals for SLV-SE430K

Brands by name

Popular brands

Sony SLV-SE430K, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE430K

Reviews:

Related manuals for SLV-SE430K

Brands by name

Popular brands