Sony SLV-SE310D Operating Instructions Manual Download

Page: 74 / 81

Editing with another VCR

Master Page : Left

filename[010ADDO.fm] model name1[SLV-SE310D] model name2[SLV-SE510D] [3-065-669-E1 (1)]

Notes

• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other

VCR, select the input correctly to prevent a humming noise.

• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-

2106HG cable instead and connect the cable to the line out jacks of the other VCR.

• When you connect another VCR to the DECODER/LINE-2 IN connector, set

DECODER/LINE2 to LINE2 in the OPTIONS-2 menu.

Operation (when recording on this VCR)

Before you start editing

• Turn on your TV and set it to the

video channel.

• Press INPUT SELECT to display

the connected line in the display
window.

• Press SP/LP to select the tape

speed, SP or LP.

To stop editing

Press the

(stop) buttons on both VCRs.

Tip

• To cut out unwanted scenes while editing, press

(pause) on this VCR when an

unwanted scene begins. When it ends, press

(pause) again to resume recording.

Note

• If you start editing following the procedure above, the VCR won’t start recording

with the OPC function. To record a tape with the OPC function, press

REC

again during recording pause in step 3 so the VCR analyses the tape. Then, press

(pause) after the OPC indicator stops flashing to start recording. If you press

(pause) before the OPC indicator stops flashing, the OPC function is cancelled.

Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.

Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press

(pause).

Press

REC on this VCR to set it to recording pause.

To start editing, press the

(pause) buttons on both VCRs at the same

time.

REC

Summary of Contents for SLV-SE310D


















































































Search results

Summary of Contents for SLV-SE310D

Reviews:

Related manuals for SLV-SE310D

Brands by name

Popular brands

Sony SLV-SE310D, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE310D

Reviews:

Related manuals for SLV-SE310D

Brands by name

Popular brands