56
Setting the recording duration time
Setting the recording duration time
After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you start
…
• Refer to “Index to parts and controls” for button locations.
To extend the duration
Press
z
ENR repeatedly to set a new duration time.
To cancel the duration
Press
z
ENR repeatedly until the
indicator disappears and the VCR
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press
x
(stop).
Note
• You cannot display the current tape time in the display window when setting the
recording duration time.
1
While recording, press
z
ENR.
The
indicator appears in the display window.
2
Press
z
ENR repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
In LP mode
Each press advances the time as shown below.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
0:30
1:00
4:00
4:30
Normal recording
0:30
1:00
8:00
9:00
Normal recording
Summary of Contents for SLV-SE230B
Page 79: ...79 Index ...