Sony SLV-K877PL Operating Instructions Manual Download

Page: 46 / 76

Additional Operations

Using the supplied microphone

You can control some of the VCR’s karaoke functions with the microphone.

CHOI button
Press and hold to rewind the tape while
viewing the picture.

buttons

Change the pitch in Key Control mode
(page 49).
Set the harmony interval in Self Duet
mode (page 50).

KEY/S.D./OFF selector
Select KEY or S.D. to switch the
microphone on in the Key Control mode
or the Self Duet mode. Select OFF to
switch the microphone off.

Note

• The

buttons on the microphone may not operate with other VCRs.

Tip

• When you sing along with TV broadcasts or music played back on equipment

connected to the LINE IN jacks on the VCR, play the music source and follow steps
1 and 4.

Notes

• If the sound is reproduced through a stereo amplifier, turn down the volume of

amplifier before operation.

• If feedback occurs, turn down the microphone or TV volume, or move the

microphone away from the speakers.

Karaoke sing-along (continued)

Summary of Contents for SLV-K877PL













































































Search results

Summary of Contents for SLV-K877PL

Reviews:

Related manuals for SLV-K877PL

Brands by name

Popular brands

Sony SLV-K877PL, Operating Instructions Manual

Search results

Summary of Contents for SLV-K877PL

Reviews:

Related manuals for SLV-K877PL

Brands by name

Popular brands