manualshive.com logo in svg

Sony SLV-EZ212AZ, Operating Instructions Manual

Share
Download
Sony SLV-EZ212AZ Operating Instructions Manual Download Page 34

Basic Operations

34

SLV-EZ717_GB   3-065-578-11 (1)

Safety tab

To save a recording

To prevent accidental erasure, break off the
safety tab as illustrated. To record on the tape
again, cover the tab hole with adhesive tape.

To record NTSC colour system programmes (SLV-EZ717AS/NZ only)

NTSC colour signals can be recorded on this VCR from the LINE-1 IN or
LINE-2 IN jacks.

To select the line input, press INPUT SELECT or PROG +/– so that “L1” or
“L2” appears in the display window.

For tape speed, select SP or EP in step 4.

EP (Extended Play) provides recording time three times as long as SP,
however, SP produces better picture and sound quality.

When playing a tape, the VCR automatically detects the tape speed.

Tips

• To select a programme position, you can use the programme number buttons on the

remote commander. For two-digit numbers, press the 

?

 (ten’s digit) button

followed by the programme number buttons.

• You can select a video source from the LINE-1 IN or LINE-2 IN (SLV-EZ717AS/NZ

only) jacks. Press INPUT SELECT or PROG +/– to display “L1” or “L2” (SLV-
EZ717AS/NZ only) in the display window.

• The display appears on the TV screen indicating information about the tape, but the

information will not be recorded on the tape.

• If you do not want to watch TV while recording, you can turn off the TV.
• You can have the VCR stop recording automatically after starting at a specified

time. For details, see “Setting the recording duration time” on page 53.

Notes

• The display does not appear during still (pause) mode or slow-motion playback.
• It may take up to one minute for the VCR to calculate and display the remaining

tape length after you press DISPLAY.

• The remaining tape length does not appear while playing or (for SLV-EZ717AS/NZ

only) recording in the NTSC system.

Recording TV programmes (continued)

01GB04BAS-AS/NZ.p65

10/1/01, 11:23

34

Summary of Contents for SLV-EZ212AZ













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands