Sony SLV-ED919MI Operating Instructions Manual Download

Page: 69 / 76

Additional Information

Recor

ding

Symptom

A TV programme does not
appear on the TV screen.

TV reception is poor.

The recorded picture has no
colour or unusual colour.

The tape starts playing as soon
as it is inserted.

The tape is ejected when you
press

REC.

Nothing happens when you
press

REC.

The timer does not operate.

Timer r

ecor

ding

Remedy

• Make sure the TV is set to the video channel. If you are

using a monitor, set it to video input.

• Select the correct source with the INPUT SELECT or

PROG +/– buttons. Select a programme position when
recording TV programmes; select “L1” or “L2” when
recording from other equipment.

• Adjust the TV aerial.
• Make sure SYSTEM (B/G, D/K, I, or M) in the TUNER

PRESET menu is set to the system in your area.

• Set the PAL/MESECAM option in the SET UP MENU

according to your local colour system.

• The safety tab has been removed. To record on this

tape, cover the tab hole.

• Check that the safety tab has not been removed.

• Make sure the tape is not at its end.

• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer

recording.

• Make sure your timer settings are past the current

time.

• The clock stops if the VCR is disconnected from the

mains for more than eight hours. Reset the clock and
timer.

• Turn the power off and unplug the mains lead.

continued

Summary of Contents for SLV-ED919MI













































































Search results

Summary of Contents for SLV-ED919MI

Reviews:

Related manuals for SLV-ED919MI

Brands by name

Popular brands

Sony SLV-ED919MI, Operating Instructions Manual

Search results

Summary of Contents for SLV-ED919MI

Reviews:

Related manuals for SLV-ED919MI

Brands by name

Popular brands