1-13
57
Recording TV programs using the VCR Plus+
®
system (SLV-D550P only)
Ba
sic
O
p
er
at
ions
To stop recording
To stop the VCR while recording, press
x
STOP.
To use the DVD-VCR after setting the timer
To use the DVD-VCR before a timer recording begins, just press
?
/
1
. The timer
indicator disappears from the display window and the DVD-VCR switches on.
Remember to press
?
/
1
to reset the VCR to the timer recording standby mode after
using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 43).
• Display tape information on the TV screen (page 45).
• Check the timer settings (page 58).
• Watch another TV program (page 46).
Tip
• To check, change or cancel the program setting, see “Checking/changing/canceling timer
settings” on page 58.
Notes
• If the VCR does not accept the PlusCode number, this means that:
– The PlusCode number is incorrect.
– Once, Mo~Fr, or Weekly was selected incorrectly. You cannot select MO~FR or Weekly
for a program that airs more than seven days ahead.
Correctly set the PlusCode number again from step 2.
• When the PlusCode number is incorrect, “Invalid code” will appear in the display.
59
Checking/changing/canceling timer settings
Ba
sic
O
p
er
at
ions
When the timer settings overlap
The program that starts first has priority and the second program starts recording only
after the first program has finished. If the programs start at the same time, the
program listed first in the menu has priority.
3
Press
O
RETURN to confirm the setting.
Press
O
RETURN again to exit the menu.
Program 1
Program 2
about 20 seconds will be cut off
about 20 seconds
60
Locking the DVD-VCR (Child Lock)
Locking the DVD-VCR
(Child Lock)
After you have set the timer, you can lock all
of the buttons on the DVD-VCR so that the
settings are not canceled by mistake.
To lock the DVD-VCR
When the DVD-VCR is turned on, hold down
?
/
1
POWER on the unit until “LOCK”
appears in the display window. The DVD-VCR turns off and the
indicator
remains lit if there is a timer setting. The DVD-VCR will not work except for timer
recordings.
To unlock the VCR
Hold down
?
/
1
POWER on the unit until “LOCK” disappears from the display
window. The DVD-VCR is unlocked and turns on.
To stop timer recording while the DVD-VCR is locked, press
x
. The recording stops
and the DVD-VCR is unlocked.
Note
• The DVD-VCR will be unlocked when:
– You stop timer recording by pressing
x
.
– You insert a tape.
– The AC power cord is disconnected or power supply stops.
?
/
1
POWER
x
58
Checking/changing/canceling timer settings
Checking/changing/canceling timer
settings
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 10).
• When using a decoder, turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press
V/v
to select
(PROGRAM) and press ENTER. You can also
display the timer programming menu by
pressing TIMER.
The timer programming menu appears.
2
Press
V/v
to select setting you want to change
or cancel.
• To change the setting, press
B/b
to select
the item you want to change, and press
V/v
to change it.
• To cancel the setting, press CLEAR.
TIMER
CLEAR
SET UP
V/v/B/b
ENTER
O
RETURN
CH START
END
DATE
RETURN
SPEED
v
V
b
B
0 1 0 5 3 1
PM
0 7 3 1
PM
1 / 2 0
Auto
SP
0 3 0 1 3 1
AM
0 3 3 2
1 / 2 1
AM
0 6 0 6 3 2
0 8 3 2
PM
PM
1 / 2 1 EP
CH START
END
DATE
RETURN
SPEED
v
V
b
B
0 1 0 5 3 1
PM
0 7 3 1
PM
1 / 2 0
Auto
SP
0 3 0 1 3 1
AM
0 3 3 2
1 / 2 1
AM
0 6 0 6 3 2
0 8 3 2
PM
PM
1 / 2 1 EP
CLEAR
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299