Sony SLV-D271P - Dvd/vcr Combo Operating Instructions Manual Download Page 97

Page: 97 / 132

VCR Ad

ditio

l Ope

tion

Editing with another VCR

To stop editing

Press the

(stop) buttons on both VCRs.

Tip

• To cut out unwanted scenes while editing, press

on this VCR when an unwanted scene

begins. When it ends, press

again to resume recording.

Operation (when recording on this VCR)

Before you start editing

• Turn on the VCR and the TV and set it to

the video channel.

• Press INPUT SELECT to display “L1” or

“L2” in the display window.

• Press SP/EP to select the tape speed, SP or

EP.

Insert a source tape with its safety tab removed into the other (playback) VCR. Search for
the point to start playback and set it to playback pause.

Insert a tape into this (recording) VCR. Search for the point to start recording and press

Press

REC on this VCR to set it to recording pause.

To start editing, press the

(pause) buttons on both VCRs at the same time.

REC

Summary of Contents for SLV-D271P - Dvd/vcr Combo





































































































































Search results

Summary of Contents for SLV-D271P - Dvd/vcr Combo

Reviews:

Sony SLV-D271P - Dvd/vcr Combo, Operating Instructions Manual, Page: 97 / 132

Search results

Summary of Contents for SLV-D271P - Dvd/vcr Combo

Reviews: