background image

COLOR DOME CAMERA

User Guide

6

COLOR DOME CAMERA

User Guide

7

Samsung Techwin cares for the environment at all product manufacturing 

stages to preserve the environment, and is taking a number of steps to provide 

customers with more environment-friendly products.The Eco mark represents 
Samsung Techwin

s will to create environment-friendly products, and indicates 

that the product satisfies the EU RoHS Directive.

This information is provided to ensure your safety and to prevent any losses, financial or 

otherwise. Please read it carefully and use the product accordingly.

Warnings & Cautions

  *     For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as 

an aerial ladder while providing after-sales service shall be at your expense.

  * Separate the power plug during a thunder storm.
  *  This product is only part of a surveillance system. Therefore, we can't compensate for material loss and/or personal 

injuries by robbery, fire, natural disaster or something like this type.

Ignoring this information may 

result in material loss and/or 
serious personal injuries including 

death.

Indicates “Never Allowed.”

Ignoring this information may 

result in material loss and/or a 
slight injuries. 

Indicates “No Disassembling.”

Warning/Attention/Special Mark Messages 

Precautions

Do not install under extreme 
temperature conditions.

Use only under temperature conditions between 

-10°C and +50°C. Provide good ventilation 

when using in high temperature conditions.

Do not install in high humidity 
environment.

May lower image quality.

Do not install under unstable 
lighting conditions.

Severe lighting changes or flickering may 

hinder normal camera operation.

Avoid touching the camera lens.

The lens is the most important component 

of the camera. Be careful not to smear it 

with fingerprints.

Do not drop the camera or 
subject it to physical shock.

May cause a product malfunction.

Never keep the camera face to 
strong light directly.

May damage the CCD.

Summary of Contents for SIR-4260V




















Reviews: