14
Setting up the remote commander
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
• Do not use different types of batteries together.
• Do not leave the remote commander in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing
the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus.
Doing so may cause a malfunction.
• Some buttons may not work with certain Sony TVs.
*
1
SLV-SE840D/E and SE747E only
*
2
not available on SLV-SE240D
Controlling other TVs with the remote commander
(SLV-SE840D/E and SE747E only)
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the following table, set the appropriate manufacturer’s code
number.
* These buttons may not work with all TVs.
Switch to Teletext*
1
/
(Teletext)
Select the sound*
2
AUDIO MONITOR
Use FASTEXT*
1
FASTEXT buttons
Call up the on-screen display
DISPLAY
Change the Teletext page*
1
c
⁄
C
Switch to/from wide mode of a Sony wide TV (For
other manufactures’ wide TVs, see “Controlling
other TVs with the remote commander (SLV-
SE840D/E and SE747E only)” below.)
(wide)
1
Set
[TV]
/
[VIDEO]
at the top of the remote commander to
[TV]
.
2
Hold down
?
/
1
, and enter your TV’s code number using the programme
number buttons. Then release
?
/
1
.
Now you can use the following TV control buttons to control your TV:
?
/
1
,
t
TV/VIDEO, programme number buttons,
-
(ten’s digit),
PROG +/–,
2
+/–,
a
(TV),
/
(Teletext), FASTEXT buttons,
(wide)*, MENU*,
M
/
m
/
<
/
,
*, and OK*.
To
Press
Summary of Contents for ShowView SLV-SE740D
Page 83: ......
