![background image](http://html.mh-extra.com/html/sony/shake-x1d/shake-x1d_operating-instructions-manual_1330192016.webp)
16
GB
VIDEO OUT jack
Use a video cord (not supplied) to
connect to the video input jack of a TV
or projector.
Do not connect this unit to the TV through
the video deck.
Speakers
LED SPEAKER terminals
Connect the LED SPEAKER connector
of the speaker to this terminal.
The lighting on the speakers will
react according to the music source.
You can select the Speaker Light
according to your preference
(page 43).
SPEAKERS
terminals
Be sure to use only the supplied
speakers.
When connecting speaker cords, insert
the connector straight into the
terminals.
Power
Connect the AC power cord (mains
lead) (supplied) to the unit, then plug it
into a wall outlet.
A small space is left between the plug
and the rear panel even when the
power cord (mains lead) is inserted
firmly. The cord is supposed be
connected this way. This is not a
malfunction.
If the AC plug of your unit does not fit
into the wall outlet, attach the supplied
AC plug adaptor (only for models
supplied with the AC plug adaptor).
The demonstration appears in the
display panel. Press
to turn on the
system and the demonstration
automatically ends.
Insert the two supplied R03 (size AAA)
batteries by matching the polarities as
shown below.
Do not mix an old battery with a new
one or mix different types of batteries.
If you do not use the remote control for
a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
Note
Notes
Notes
Inserting batteries
Notes
AC power cord (mains
lead) (supplied)
To the wall
outlet
Summary of Contents for SHAKE-X1D
Page 61: ......
Page 62: ......
Page 63: ......
Page 64: ... 2015 Sony Corporation Printed in Malaysia 4 571 331 12 1 ...