65
GB
Additional Inf
orma
tion
SHAKE-X70D/SHAKE-X30D/SHAKE-X10D.GB.4-691-054-
12
(1)
•
—Tuner-related devices: up to
4 devices
•
—Audio system (receiver/
headphone): up to 1 device
(used by this system)
Party Chain
Party Chain function cannot be
activated.
•
•
Check the connections
(page 50).
•
•
Make sure the audio cables are
connected correctly.
“PARTY CHAIN” is flashing on the
display.
•
•
You cannot select AUDIO IN
function if you make connection
(page 50) during Party Chain
function. Select other function
(page 52).
•
•
Press PARTY CHAIN on the unit.
•
•
Restart the system.
Party Chain function does not
work properly.
•
•
Turn off the system. Then, turn it
back on again to activate the Party
Chain function.
Resetting the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to
perform this operation.
1
Unplug the AC power cord (mains
lead), then plug it back in.
2
Press
to turn on the system.
3
Hold down DJ OFF and
for
about 3 seconds.
“RESET” appears on the display.
After the reset completes, the
system automatically reboots. Press
to turn on the system.
All user-configured settings, such as
preset radio stations are reset to
factory default setting (except for
some setup menu settings).
To reset all setup menu settings, see
“Returning the setup menu settings
to the default” (page 65).
Returning the setup menu
settings to the default
You can return the setup
menu settings (except for
[PARENTAL CONTROL] settings) to
the default settings.
1
Press SETUP.
The setup menu appears on the TV
screen.
2
Press / repeatedly to select
[SYSTEM SETUP], then press
.
3
Press / repeatedly to select
[RESET], then press
.
4
Press / repeatedly to select
[YES], then press
.
It takes a few seconds to complete.
Do not press
while resetting the
system.
Summary of Contents for SHAKE-X10D GB
Page 74: ......
Page 75: ......
Page 76: ... 2017 Sony Corporation Printed in Malaysia 4 691 054 12 1 ...
