11
Connecting digital audio equipment
Pr
eparation
GB
By using a commercially available optical digital cable, you can enjoy
surround sound with the effect of being in a movie theater or a concert hall.
When connecting the console to audio equipment with digital connectors,
refer to the instructions supplied with the device to be connected.
Notes
• If you connect the console to audio equipment using an optical digital cable, it may
affect the audio output of some PlayStation
®
2 format software with the result that
no sound is produced. If this happens, use a cable such as the supplied AV cable
(integrated audio/video) and connect it to the console's AV MULTI OUT
connector. Do not use an optical digital cable.
• After connecting digital audio equipment, set "Digital Out (Optical)" to "On" in the
System Configuration menu. For details, see "Digital Out (Optical)" (
1
Insert the analog controller (DUALSHOCK
®
2) into a controller
port of the console.
Note
Some software titles designate a specific controller port to be used. Refer to the
instructions supplied with the software for details.
Connecting digital audio
equipment
DIGITAL IN
OPTICAL
Console rear
Connected device
Commercially available optical
digital cable
Connecting the controller
MEMORY CARD
Console front
Analog controller
(DUALSHOCK
®
2)
Summary of Contents for SCPH-70006
Page 90: ...90 版本資訊畫面 注意事項 在以下情況中 設定將不解除 1 步驟 4 後不開始播放 DVD 2 步驟 6 之前 您重新啟動或關閉主機 ...
Page 101: ......
Page 102: ......
Page 103: ......