Sony SAT-HD200 - Directv High Definition Satellite Receiver Operating Instructions Manual Download Page 31

Page: 31 / 104

3-5. TV Connection - HD Monitor (DVI-HDTV type)

TV Viewing

Connect the “OUT TO TV” jack on the DIRECTV

High-Definition Receiver to the “ANT IN” jack on your TV

using a coaxial RF cable.

Connect the “DVI-HDTV OUT” jack on the DIRECTV HD Receiver to the “DVI-HDTV IN” jack of your TV using

DVI -type connector. (The “TYPE” switch must be set toward the “RGB/DVI-HDTV” jacks.)

Connect the L/R “AUDIO OUT” jacks on the DIRECTV HD Receiver to the L/R “AUDIO IN” jacks on your TV using

RCA-type cables.

(Note : The DVI-HDTV OUT jack is available when 480p, 720p, or 1080i display format is selected.)

Note: For best access to high-definition and programming from DIRECTV, connect the DVI-HDTV output to

a DVI-HDTV input on your high-definition TV or monitor. A DVI-HDTV input is one that is compliant with

EIA-861 and HDCP specifications. Check your TV or monitor's user manual to find out if the TV or moni-

tor's DVI input is compliant with these specifications.

Phone wall jack

HD-Ready TV

Cable TV
wall jack

Antenna

ANT.IN

LNB
Sat B

LNB
Sat C

LNB
Sat A

Dish

5x4 Multi-switch

Output

Summary of Contents for SAT-HD200 - Directv High Definition Satellite Receiver









































































































Search results

Summary of Contents for SAT-HD200 - Directv High Definition Satellite Receiver

Reviews:

Related manuals for SAT-HD200 - Directv High Definition Satellite Receiver

Brands by name

Popular brands

Sony SAT-HD200 - Directv High Definition Satellite Receiver, Operating Instructions Manual

Search results

Summary of Contents for SAT-HD200 - Directv High Definition Satellite Receiver

Reviews:

Related manuals for SAT-HD200 - Directv High Definition Satellite Receiver

Brands by name

Popular brands