HELP
SAL28F28 (2.8/28) (28mm F2.8)
HELP07
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-85):
J-6082-626-A
1.
Apply the adhesive bond ((LOCTITE 460) to the stopper screw, and attach it to the lens mount reveting block.
2.
Apply the anti-diffusion agent (A-20) and grease (G-85) to the instruction portions of the lens mount reveting block.
3.
Turn counterclockwise the pin of iris control plate unit to close the iris.
4.
Attach the lens mount riveting block, aligning the cut portion of preset ring lever with the pin of iris control plate unit and the coupler
hole with the coupler.
HELP08
Oil (O-20): J-6082-610-A
Apply small amount of oil (O-20) to the instruction portion of the main spring.
Apply the adhesive bond
(LOCTITE460)
Lens Mount Reveting Block
Apply the anti-diffusion agant
(A-20)(All circumference)
Apply the grease(G-85)(3 claws)
Aplly small amount(O-20)(On contact area)
Coupler Hole
Rear Light Shield Barrel Tube
Coupler
Pin of the iris control plate unit
