HELP
SAL1870 (3.5-5.6/18-70) (DT 18-70mm F3.5-5.6)
6.
Match the positions of the linear slider positioned at the window of the zoom control tube block and the guide key positioned at two
holes of joint tube block.
7.
Insert the joint tube block into the zoom control tube block to the end.
Note:
If it cannot be inserted, return to step 1, and check that the focus connection part is matched to the claw of the gear barrel.
8.
After inserting, check that the position is as shown in the figure.
9.
Turn the zoom barrel until the screw hole of the zoom cam barrel is seen from the hole of the zoom barrel as shown in the figure.
10. Attach the zoom coupling roller, and fix it with the screw.
Window
Screw hole of the zoom cam barrel
Hole for the zoom coupling roller
Window
Screw hole of the zoom cam barrel
Zoom Coupling Roller
Zoom Barrel
Window
Two holes
Focus Connection Part
Liner slider
(1st Moving Barrel)
Guide key
(The internal circumference
side of the connection barrel.)
Joint Tube Block
Zoom Control Tube Block
Claw of the gear barrel
