manualshive.com logo in svg

Sony SAL1118 - DT 11-18mm f/4.5-5.6 Aspherical ED Super Wide Angle Zoom Lens, Service Manual

Share
Download
Sony SAL1118 - DT 11-18mm f/4.5-5.6 Aspherical ED Super Wide Angle Zoom Lens Service Manual Download Page 24

HELP

SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)

3.

Fix the focus coupling barrel with three COMA-E (A-L) and COMA screw-Es.

Note:

Select the COMA-E of a proper diameter from the following table.

Part No.

Description

Diameter

D1

D2

2-886-821-01

COMA-E-A

4.01

4.51

2-886-830-01

COMA-E-K

4.00

4.50

2-886-831-01

COMA-E-L

3.99

4.49

4.

Assemble the support barrel assy, and then align the holes as shown in the figure.

5.

Fix the support barrel assy with three COMA-D (A-D) and COMA screw-As.

Note:

Select the COMA-D of a proper diameter from the following table.

Part No.

Description

Diameter

2-886-856-01

COMA-D-A

4.51

2-886-859-01

COMA-D-D

4.50

Hole

Support Barrel Assy

COMA-D (A-D) and COMA screw-A

Summary of Contents for SAL1118 - DT 11-18mm f/4.5-5.6 Aspherical ED Super Wide Angle Zoom Lens
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands