4
SA-WMSP69
• NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
•
A
: B+ Line.
•
B
: B– Line.
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
no mark : Power on
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal production
tolerances.
• Signal path.
F
: AUDIO
THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is
printed in each block.)
For schematic diagrams:
Note:
• All capacitors are in
µ
F unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
•
C
: panel designation.
Note:
The components identified by mark
0
or dotted line
with mark
0
are critical for safety.
Replace only with part number specified.
For printed wiring boards:
Note:
•
X
: parts extracted from the component side.
•
Y
: parts extracted from the conductor side.
•
: Pattern from the side which enables seeing.
