11
GB
Specifications
SA-VE315/VE312
SS-V315 (front and rear speakers)
Speaker system
Full range, magnetically
shielded
Speaker units
5
×
10 cm (2
×
4 in.),
cone type
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling capacity
Maximum input power:
100 watts
Sensitivity level
87 dB (1 W, 1 m)
Frequency range
90 Hz - 20,000 Hz
Dimensions (w/h/d)
Approx. 68
×
150
×
125 mm (2
3
/
4
×
6
×
5 in.),
including front grille
Mass
Approx. 640 g (1 lb 7 oz)
each
SS-CN315 (center speaker)
Speaker system
Full range
×
2,
magnetically shielded
Speaker units
5
×
10 cm (2
×
4 in.),
cone type
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling capacity
Maximum input power:
120 watts
Sensitivity level
89 dB (1 W, 1 m)
Frequency range
90 Hz - 20,000 Hz
Dimensions (w/h/d)
Approx. 301
×
68
×
125 mm (11
7
/
8
×
2
3
/
4
×
5 in.), including front
grille
Mass
Approx. 1.4 kg (3 lb 1 oz)
Troubleshooting
Should you encounter a problem with your
speaker system, check the following list and
take the indicated measures. If the problem
persists, consult your nearest Sony dealer.
There is no sound from the speaker
system.
• Make sure all the connections have been
correctly made.
• Make sure the volume on the amplifier
has been turned up properly.
• Make sure the program source selector on
the amplifier is set to the proper source.
• Check if headphones are connected. If
they are, disconnect them.
There is distortion in the subwoofer sound
output.
• Check if any sound-enhancing functions
have been activated on the amplifier. If
they have, turn them off.
There is hum or noise in the speaker
output.
• Make sure all the connections have been
correctly made.
• Make sure none of the audio components
are positioned too close to the TV set.
The sound has suddenly stopped.
• Make sure all the connections have been
correctly made. Contact between bare
speaker wires at the speaker terminals
may cause a short-circuit.
continued