background image

Power consumption

On: 45.6 W (during charging the built-in battery)
Standby mode: 1 W or less
Turned off: 0.5 W or less

Built-in battery life

Up to 10 hours (in normal playback)*

1

*

2

Up to 3 hours (in full volume playback)*

1

*

3

Up to 10 hours*

4

*

1

  Actual performance time may vary from the listed time due 

to the volume, music source, and usage conditions.

*

2

 Measured value acquired by using our specified music 

source, connecting to the compatible model HT-A7000, 
setting the volume level of the compatible model 
HT-A7000 to 38, with the factory default settings. 

*

3

 Measured value acquired by using our specified music 

source, connecting to the compatible model HT-A7000, 
setting the volume level of the compatible model 
HT-A7000 to maximum, setting the volume level of the rear 
speaker to maximum, setting the voice mode to on, with 
the factory default settings. 

*

4

 Measured value acquired by using our specified test signal 

and playing with its volume adjusted so that the sound 
pressure of 70 dB is obtained at a distance of 1 meter from 
the rear speakers.

Built-in battery charging time

About 4 hours (when using with the supplied AC 
adaptor)*
(10 minutes of charging: playable for up to 90 minutes)*

*  Actual charging time may vary from the time above due to 

the surrounding temperature and usage conditions.

Wireless transmitter/receiver section

Communication system

Wireless Sound Specification Version 4.0

Frequency band

5 GHz

Modulation method

OFDM

Other information

Operating temperature

Between 5 °C and 35 °C.

Dimensions (w/h/d) (approx.)

145 mm × 250 mm × 134 mm (projecting parts not 
included)

Mass (approx.)

2.4 kg

Included items

• Rear speaker R (1), Rear speaker L (1)
• AC adaptor (AC-045RS5E) (2)
• AC plug*

1

*

2

: For customers in Hong Kong and Sri Lanka

: For customers in Taiwan

: For customers in Thailand

: For customers in other countries/regions

• Cable guide (2)
• Operating Instructions (1)

*

1

  The AC plug is not supplied depending on countries/

regions. The number of the supplied AC plugs differs 
depending on countries/regions. The AC plug is attached 
to the AC Adaptor in advance depending on countries/
regions.

*

2

 You may need to change the AC plug that is attached to 

the AC adaptor to another one depending on the 
countries/regions. Make sure to attach the AC plug that 
matches to the shape of the AC outlet (mains). 
Remove the AC plug by sliding upward while pressing the 
PUSH button on the AC adaptor, then attach the desired AC 
plug by sliding it from above.

Important information 
on software

This product contains software that is subject to the 
GNU General Public License (“GPL”) or GNU Lesser 
General Public License (“LGPL”). These establish that 
customers have the right to acquire, modify, and 
redistribute the source code of said software in 
accordance with the terms of the GPL or the LGPL.

For the method to confirm the GPL, LGPL and other 
software licenses contained in the rear speakers, 
please refer to the Operating Instructions of a 
compatible model.
When you use the compatible model HT-A7000, 
please refer to [Software License Information] under 

 [Setup] - [Advanced Settings] - [System Settings] 

on the home menu.

You may find a copy of the relevant source code as 
required under the GPL/LGPL (and other licenses) at 
the following URL.
You may obtain the source code as required by the 
GPL/LGPL  on a physical medium from us for a period 
of three years after our last shipment of this product 
by applying through the form at the following URL.
This offer is valid to anyone in receipt of this 
information.
https://oss.sony.net/Products/Linux/

Please note that Sony cannot answer or respond to 
any inquiries regarding the content of this source 
code. 

All other trademarks are trademarks of their 
respective owners.

Summary of Contents for SA-RS5











Reviews: