26
GB
Maintenance mode
Activating maintenance mode
1
Confirm that the photo frame is turned off.
2
Press
1
while holding down VIEW MODE on the
photo frame to turn it on.
Hold down VIEW MODE until the following screen appears.
Maintenance mode is activated.
3
Press
v
/
V
to select [Update firmware ] or [Initialize
system] and press
.
Update firmware:
For detailed information on how to obtain an update file or how
to update the firmware, access and view:
http://www.sony.net/
Initialize system:
The operation screen is displayed.
Go to “Initializing the system” below.
z
Tip
Perform firmware update or system
initialization of the photo frame in
the following cases:
Firmware update:
Firmware update allows you to
obtain optimum performance and
use the photo frame with upgraded
functions.
System initialization:
When your photo frame does not
start properly, initialize the system
of the photo frame. If the symptom
persists, consult with your Sony
dealer.
Summary of Contents for S-Frame 4-259-434-13 (1)
Page 39: ...39 GB memo ...
