manualshive.com logo in svg

Sony RM-W150, Service Manual

Share
Download
Sony RM-W150 Service Manual Download Page 105

27

Additional Information

Sony KV-AR292/252N90 Group D5 (

GB Dummy

)_4-101-682-E2 (1)

Good morning!

Dotted lines or
stripes

Double images or
“ghosts”

No color

Picture slant

Abnormal color
patches

TV cannot receive
stereo broadcast
sound.

or

Stereo broadcast
sound switches
on and off or is
distorted.

Possible cause

Symptom

Solutions

Page

• There is local

interference from cars,
neon signs, hair dryers,
power generators, etc.

• Broadcast signals are

reflected by nearby
mountains or
buildings.

• The antenna setup is

inappropriate.

• Use of a booster is

inappropriate.

• The color level setting

is too low.

• The antenna setup is

inappropriate.

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.

• The magnetic

disturbance from
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.

• Connection is loose or

the cable is damaged.

• The antenna setup is

inappropriate.

• Do not use a hair dryer or other

equipment near the TV.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Use a highly directional antenna.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Turn off or disconnect the booster if it is in

use.

• Display the “Video” menu and select the

desired picture mode, then adjust the
“Color” level in “Picture Controls”.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Keep external speakers or other electrical

equipment away from the TV.

• Display the “Setup” menu and adjust “Tilt

Correction” so that the picture is optimal.

• Keep external speakers or other

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press 

!

 (main power) on the TV to turn

off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup. Contact a Sony

dealer for advice.

–

–

–

–

–

17

–

–

23

–

24

–

continue

01GB08ADV-TWN.p65

13/8/1918, 1:40 AM

27

Black

Summary of Contents for RM-W150













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands