manualshive.com logo in svg

Sony RM-W100, Service Manual

Share
Download
Sony RM-W100 Service Manual Download Page 84

26

Additional Information

Sony KV-AR21M81 Group A2 (

GB,

 FR, PR, AR)_4-095-979-15 (1)

continued

Good picture

No sound

No sound or
inappropriate
sound

Dotted lines or
stripes

Double images or
“ghosts”

No color

Possible cause

Symptom

Solutions

Page

• The volume level is too

low.

• The sound is muted.

• The Portable Audio

Mode is functioning.

• There is local

interference from cars,
neon signs, hair dryers,
power generators, etc.

• Broadcast signals are

reflected by nearby
mountains or
buildings.

• The antenna setup is

inappropriate.

• Use of a booster is

inappropriate.

• The color level setting

is too low.

• The color system

setting is
inappropriate.

• The antenna setup is

inappropriate.

• Press 

2

 + to increase the volume level.

• Press 

 to cancel the muting.

• Display the “Setup” menu and set the

“Portable Audio Mode” to “Off”.

• Do not use a hair dryer or other

equipment near the TV.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Use a highly directional antenna.

• Use the fine tuning (“Fine”) function.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Turn off or disconnect the booster if it is in

use.

• Display the “Picture” menu and select

“Personal” of “Mode”, then adjust the
“Color” level in “Picture Adjustment”.

• Display the “Setup” menu and check the

“Color System” setting (usually set this to
“Auto”).

• Check the antenna setup. Contact a Sony

dealer for advice.

9

9

22

–

–

–

21

–

–

16

22

–

01GB08ADV-MIX.p65

3/10/03, 10:44 AM

26

Black

Summary of Contents for RM-W100























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands