Sony RM-VZ950T, Operating Instructions Manual

Page: 9 / 84

9
GB
4
Turn the Jog dial to select
the Setting position number
(“S-1” to “S-8”).
Each time you turn the Jog dial,
the display changes as follows.
Notes
• If you have changed the names of
the components (page 26) those
names are displayed.
• If you press the Jog dial at “EXIT,”
the Commander returns to the top
of SET mode (Step 2).
5
Press the Jog dial.
The component name flashes
in the display.
Note
The component names displayed at
this point represent the type of the
component to operate. These names
cannot be changed.
If you want to set a different
component to this Setting
position number, turn the Jog
dial to select the desired
component. The display
changes as shown below.
Continued
Example: To set up a Philips’ TV
at “S-1/TV”
1
See the tables in the
supplied “Component
Code Numbers,” and find
the three-digit code number
for the desired component.
If more than one code number
is listed, use the number that is
listed first.
For example, to set up a
Philips’ TV, you would use the
code number 086.
2
Press SET.
“PRESET” flashes in the
display, and the Commander
changes to SET mode.
3
Press the Jog dial.
The Setting position number
flashes, and the component
name appears in the display.
The Commander changes to
the Component PRESET mode.
Note
If you have changed the name of
the component (page 26) that name
is displayed.
ES
T S E
R P ET
-1 S
E S E T P R
V T
EXIT
S-8
AMP
S-7
TAPE
S-6
MD
S-1 S-2 S-3
TV SAT VCR
S-4
DVD
S-5
CD
-1 S
¢
E S E T P R
V T ¢1
EXIT AMP TAPE MD
TV SAT VCR DVD CD