Sony RM-PP412, Operating Instructions Manual

Page: 5 / 12

Lo
cati
on
of
P
a
rt
s and
Bas
ic Re
mote Oper
ations
masterpage:Right
filename[\\B-02w2000e\SONY RM-
PP412\4247244111\424724411RMPP412CEL\GB03BSC_RM-PP412-CEL.fm]
5 GB
model name1[RM-PP412]
[4-247-244-11(1)]
DISPLAY
*
qd
Press to select the information displayed on
the display of the receiver or TV screen.
ENTER (After pressing ALT) 6
After selecting a channel, disc or track
using the numeric buttons, press to enter the
valve.
Input buttons 2
Press to select the input. Use AV 1 and AV
2 to select the command mode of the
remote.
The components are factory assigned to the
inputs as follows. When you want to assign
other components, program the remote
following the steps on “Programming the
remote” on page 9.
See the table on page 8 for information on
the buttons that you can use to control each
component.
Note that the inputs are factory-set as
described in the table above. If you want to
change the factory setting of the buttons to
match your particular components, do the
procedure “Programming the remote” on
page 9.
JUMP/TIME
*
5
If you selected TV:
Press to toggle between the previous and
the current channels.
If you selected CD player, video CD
player, or DVD player:
Press to display the time information.
MAIN MENU qs
Press to select the menu of the receiver.
MASTER VOL +/– qa
Press to adjust the volume level of all
speakers at the same time.
MOVIE
3
Press to select the sound fields for movies.
MUSIC 4
Press to select the sound fields for music.
MUTING 9
Press to mute the sound.
Numeric buttons (1–9, 0/10)
*
(After
pressing ALT) qh
If you selected tuner:
Use with SHIFT to select tuner preset
station numeric input during DIRECT
TUNING or MEMORY mode.
If you selected CD player, video CD
player, DVD player, MD deck, or DAT
deck:
Press to select track numbers. 0/10 selects
track 10.
If you selected TV, VCR, or satellite
tuner:
Press to select channel numbers.
* The function of these buttons switch automatically
each time you select the input (
2
). Depending on
the component, the above operation may not be
possible or may operate differently than described.
Input(s) Assigned component(s)
VIDEO 1
VIDEO 2
VIDEO 3 VCR (VTR mode 3)
VCR (VTR mode 1)
VCR (VTR mode 2)
DVD DVD player
TV/SAT TV tuner
MD/TAPE MD deck / Tape deck (B)
CD/SACD CD player
TUNER Built-in tuner
PHONO Turntable
AUX Other audio component
MULTI CH Component connected to the
multi channel input jacks on the
receiver
continued