1-4
RM-PP1
Front bracket
Press
Pull out
Inner rail
Intermediate rail
Stopper
B4
x
8
B4
x
8
Inner rail
Inner rail
.
Attaching the inner rails
3.
Pull each inner rail from the two intermediate rails.
4.
Pull each inner rail out of the intermediate rails while
pressing each stopper.
5.
Attach the two inner rails to the unit with the eight
screws (B4
x
8).
Tightening torque: 120
x
10
_
2
N
.
m {12.2 kgf
.
cm}
B4
x
10
B4
x
10
PS3
x
14
PS3
x
14
Polyamide
washers
Polyamide
washers
Feet
Feet
Rack angle
Rack angle
Rack Mounting Procedure
.
Attaching the rack angles and removing the
feet
1.
Attach the two rack angles to the unit using the four
screws (B4
x
10) and polyamide washers.
Tightening torque: 120
x
10
_
2
N
.
m {12.2 kgf
.
cm}
c
Pay the attension to the sharp edge of rack angle.
2.
Unscrew the four screws (PS3
x
14) to remove the
feet from the bottom of the unit.
c
Keep these screws and the feet.
When operating the unit after demounting it from the rack,
be sure to reattach the feet.
Tightening torque: 80
x
10
_
2
N
.
m {8 kgf
.
cm}
1-5. Rack Mounting
