2-3
VPD-MX10
2-4. Memory
This model is composed of the following five Memory
blocks.
1. Set memory.
2. Status memory.
3. Channel memory.
4. Chroma memory.
5. W/B memory.
Gamma memory is realized in the gamma mode added by
OFF SET function of the Contrast / Brightness output
value to each device.
Set Memory
Status
Memory
No.01
No.02
No.03
INPUT-A Preset
INPUT-B Preset
No.04
No.05
No.50
No.03
...
No.50
W/B
Memory
Computer
Others
HIGH
LOW
HIGH
LOW
Set Memory
Status
Memory
No.01
No.02
No.03
INPUT-A
Preset
INPUT-B
Preset
No.50
Set Memory
Channel
Memory
Video
S Video
Input-A
Input-B
Chroma
Memory
NT358/443/BW60
PAL/PAL-M/N/
SECAM/BW50
15k RGB
Component (15k)
W/B
Memory
Computer
Others
HIGH
LOW
HIGH
LOW
CPU ROM
External NVM
CPU RAM
Active memory copy
Memory
Initialize
W/B
Memory
HIGH
LOW
Chroma
Memory
NT358/443/BW60
PAL/PAL-M/N/
SECAM/BW50
15k RGB
Component (15k)
Chroma Memory
No.05
...
No.04
No.05
No.04
...
No.50
...
No.03
No.04
No.05
Input-MS
Channel
Memory
Video
S Video
Input-A
Input-B
Input-MS
Installation
Memory
Non Reverse upside down
Reverse upside down
Installation
Memory
Non Reverse upside down
Reverse upside down
Installation Memory
No.53
No.54
No.55
No.60
...
INPUT-MS Preset
Status
Memory
No.53
INPUT-MS
Preset
INPUT-A
User
No.60
No.55
No.54
...
No.110
No.91
No.71
...
No.90
...
CPU Internal ROM
: 256Kbyte Flash Memory
CPU Internal RAM
: 16Kbyte
External NVM Memory : 16Kbyte EEPROM
For your reference, data stream will be briefed as the
follows.
When plugged in first (Standby state), whole data in the
ROM are written in the NVM (Non volatile memory).
Turning Power ON, memory data required enough for
current video image are selected from each Memory block
and developed in the RAM where adjusting is performed.
Thus, data adjusted in the RAM are written and memorized
in the NVM, automatically when in the user mode, or
triggered by memory operation ( Item in Service / Special
Service ).
W / B and Device Adjust is adjusted by an user in the
Service mode or in the Special Service mode and memo-
rized in NVM at performing memory operation. In this
moment any data adjusted in the factory will be lost.
