Sony RM-PJM1, Service Manual

Page: 12 / 102

1-6
VPL-CS1
GB
10
Location and Function of Controls
1 I / 1 1 1 1 (on/standby) key
Turns on and off the projector when the
projector is in standby mode. The ON/
STANDBY indicator lights in green
when the power is turned on.
When turning off the power, press
the
I / 1 key twice following the
message on the screen, or press and hold
the key for about one second.
For details on steps for turning off the
power, see “To turn off the power” on
page 23.
2 INPUT key
Selects the input signal. Each time you
press the key, the input signal switches
between video input and INPUT A
connector.
3
APA (Auto Pixel Alignment) key
Adjusts a picture clearest automatically
while a signal is input from a computer.
4
/– keys
Adjust the volume of the built-in
speakers.
+ : Increases the volume.
–
:
Decreases the volume.
5
Indicators
• LAMP/COVER: Lights up or flashes
under the following conditions:
– Lights up when the lamp has
reached the end of its life or
becomes a high temperature.
– Flashes when the lamp cover or air
filter cover is not secured firmly.
• FAN/TEMP (Temperature): Lights
up or flashes under the following
conditions:
– Lights up when temperature inside
the projector becomes unusually
high.
– Flashes when the fan is broken.
• POWER SAVING: Lights up when
the projector is in power saving mode.
When POWER SAVING in the SET
SETTING menu is set to ON, the
projector goes into power saving mode
if no signal is input for 10 minutes.
Although the lamp goes out, the
cooling fan keeps running. In power
saving mode, any key does not
function for the first 30 seconds. The
power saving mode is canceled when a
signal is input or any key is pressed.
• ON/STANDBY: Lights up or flashes
under the following conditions:
– Lights in red when a AC power cord
is plugged into a wall outlet. Once in
standby mode, you can turn on the
projector with the
I /
1
key.
– Lights in green when the power is
turned on.
– Flashes in green while the cooling
fan runs after the power is turned off
with the
I / 1 key. The fan runs for
about 90 seconds after the power is
turned off.
The ON/STANDBY indicator
flashes quickly for the first 30
seconds. During this time, you
cannot turn the power back on with
the
I
/
1
key.
For details on the LAMP/COVER and
the FAN/TEMP indicators, see page 32.
Control Panel
RESET MENU
POWER
INPUT
APA
VOLUME
POWER SAVING ON/STANDBY
FAN/TEMP
LAMP/COVER
ENTER
+
–
11
GB
Location and Function of Controls
O
v
e
rv
ie
w
6
ENTER key
Enters the settings of items in the menu
system.
7 Arrow keys ( M M M M / m m m m / < < < < / , , , , )
Select the menu or to make various
adjustments.
8 RESET key
Resets the value of an item back to its
factory preset value. This key functions
when the menu or a setting item is
displayed on the screen.
9
MENU key
Displays the on-screen menu. Press
again to clear the menu.
1
INPUT A connector (HD D-sub
15-pin, female)
Connect to external equipment such as a
computer.
Connects to the monitor output on a
computer using the supplied cable.
When inputting a component or 15k
RGB signal, use an optional cable.
2
Video input connector
Connect to external video equipment
such as a VCR.
• S VIDEO (mini DIN 4-pin):
Connects to the S video output (Y/C
video output) of video equipment.
• VIDEO (phono type): Connects to
the composite video output of video
equipment.
If you connect video equipment to both the
S VIDEO and VIDEO jacks, the signal
from the S VIDEO jack is selected. When
projecting the picture via the VIDEO jack,
be sure not to connect a cable to the S
VIDEO jack.
3
MOUSE connector (6-pin)
Connects to the PS/2 mouse port on a
computer via the supplied mouse cable,
to control the mouse function of the
connected computer.
4
USB connector (USB A-plug for
downstream, 4-pin)
Connect to USB equipment such as a
mouse, camera, etc.
5
USB connector (USB B-plug for
upstream, 4-pin)
Connect to the USB connector on a
computer. When you connect the
projector to the computer, the projector
recognizes the mouse of the computer
connected to the INPUT A connector
and you can control the mouse function
with the supplied Remote Commander.
The supplied application software can
be installed in the computer attached to
this connector.
6 AUDIO (stereo minijack)
connector
When listening to sound output from the
computer, connect to the audio output of
the computer.
When listening to sound output from the
VCR, connect to the audio output of the
VCR.
This connector functions as the audio
input of the INPUT A, VIDEO and S
VIDEO connectors.
Connector Panel
INPUT A S VIDEO VIDEO MOUSE AUDIO
Rear side
Note