manualshive.com logo in svg

Sony RM-AX4000 - Integrated Remote Commander, Software Manual, Page: 3 / 118

Share
Download
Sony RM-AX4000 - Integrated Remote Commander Software Manual Download Page 3

Starting up AX Remote Editor

1.

Click  the  Window s  "Start" button and point to "All Program s " - "Sony Re m ote  AX," - "AX Re m ote  Editor" and click .

AX Remote Editor starts up, and the last 

project

 appears.

The first time AX Remote Editor starts up, the "New  Project" w izard appears. Follow ing the on-screen instructions, create a project.

Hints

If you are using an operating system other than Window s XP, click the "Start" button of Window s and point to "Programs" - "Sony Remote AX" - "AX Remote
Editor" and click to start up AX Remote Editor.

If 

(the shortcut icon of AX Remote Editor) is displayed on the desktop of Window s, double-click the icon to open it. (Depending on the setting,

Window s XP may delete icons from the desktop if they have not been used for a certain period of time. If 

is not displayed on the desktop, use the

"Start" button.)

 

  

Page  3

Summary of Contents for RM-AX4000 - Integrated Remote Commander























































































































Reviews:

No comments