Sony RHT-G550, Operating Instructions Manual

Page: 9 / 52

9
GB
Gettin
g
Sta
rted
About the installation position
Install the stand after connecting all the
components to the stand.
Install the stand after allowing for a space of
more than 5 cm from the wall. This is to allow
for heat dissipation and to prevent the TV from
falling.
The stand has a back corner cut to fit in the
corner of a room. If you install the stand in a
corner of your room, it requires a space of about
77 cm from the corner of the room to the front of
the stand.
• Be careful not to pinch your fingers when setting up
the stand.
Preventing the TV from
toppling over
As a protective measure, secure the TV.
1
Place the TV on the stand.
The TV should be placed in the centre of the
stand, aligning the rear edge of the TV’s
base with the stand’s rear edge.
2
Fasten the support belt * to the stand with
a wood screw * .
3
Fit the support belt to the TV’s base, then
firmly fasten with a machine screw
* .
4
Tighten the support belt to secure in
place.
* For details on acquiring the support belt and
screws, refer to the operating instructions
supplied with Sony LCD TV.
Setting this stand
Note
More than
5 cm
77 cm
Support belt
TV's base
continued