78
“
c
” and “OTR” light up, and the remaining
recording time appears in the front panel
display.
When the counter reaches “0:00,” the recorder
stops recording and turns off.
To cancel the Quick Timer
Press
z
REC repeatedly until the counter appears
in the front panel display. The recorder returns to
normal recording mode.
To stop recording
Press
x
twice.
Checking the remaining tape length
You can check the recording information, such as
remaining tape length or recording mode, etc.
Press DISPLAY while recording.
The information display appears.
Press the button repeatedly to change the display
(page 74).
A
Recording status
B
Time counter
C
Recording mode
D
Remaining tape length
E
Current programme position
To check the remaining tape length, set “VCR
Function” – “Tape Length” in the “Features” setup
correctly (page 105).
z
Hint
You can view the information also in the front panel
display. Press TIME/TEXT repeatedly to change the
display. Note that TIME/TEXT does not work during
One-touch Timer Recording.
Notes
• The remaining tape length may not be indicated
accurately for short tapes such as E-20 or E-30, or tapes
recorded in EP mode.
• After DISPLAY is pressed, it may take one minute for
the remaining tape length to appear.
Record
0:30:00
SP
Rem 01:30
Prog. 1