69
H
D
D
Cam
cord
e
r Du
bbi
ng
Connect an HDD camcorder to the USB jack
on the recorder.
Refer as well to the instruction manual
supplied with the HDD camcorder before
connecting.
1
Turn on your HDD camcorder and the
recorder.
2
Connect your HDD camcorder to the
USB jack on the front panel.
3
Set your HDD camcorder to the USB
connection mode (example:
“
COMPUTER” or “
USB
CONNECT”).
For details, refer to the operating
instructions supplied with the HDD
camcorder.
To restart the connected USB device
Select “Restart USB Device” of “USB” in
the “Options 2” setup (page 110).
b
Notes
• Connect the HDD camcorder directly to the
recorder.
• Do not disconnect the USB cable while dubbing.
• When signal input to the USB jack (type A) on
the front panel or recorder operation cannot be
performed correctly when using an HDD
camcorder, connect the HDD camcorder to the
LINE IN jacks and follow the instructions of
“Recording from Connected Equipment” on
page 46.
• The recorder can recognize and store the
shooting date and time information of up to 10
HDD camcorders. If you connect 11 or more
HDD camcorders, one-touch dubbing and
“Incremental Dubbing” cannot be made
properly.
Preparing for HDD camcorder
dubbing
DVD recorder
to USB jack
USB cable
(not supplied)
USB output
HDD camcorder
: Signal flow
Summary of Contents for RDR-HX780
Page 1: ...3 874 363 11 1 2008 Sony Corporation RDR HX780 DVD Recorder Operating Instructions ...
Page 134: ...134 ...
Page 135: ...135 ...