50
3
Press INPUT SELECT repeatedly to
select “L3.”
4
Select the desired audio signal when
recording a bilingual programme to
the HDD or DVD-RWs/DVD-Rs (VR
mode).
Press OPTIONS to select “Line Audio
Input,” and press ENTER. Then select
“Bilingual,” and press ENTER.
For details about bilingual recording, see
page 41.
5
Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
page 40.
6
Set the timer on the connected
equipment to the time of the
programme you want to record, and
turn it off.
7
Press
c
z
SYNCHRO REC.
The SYNCHRO REC indicator lights up
on the front panel. The recorder is ready
to start Synchro-Recording.
The recorder automatically starts
recording when it receives an input
signal from the connected equipment.
The recorder stops recording when the
connected equipment turns off.
To stop recording
Press
x
REC STOP or
c
z
SYNCHRO
REC.
To cancel Synchro Rec
Press
c
z
SYNCHRO REC.
The SYNCHRO REC indicator on the
recorder turns off.
b
Notes
• The recorder starts recording only after detecting
a video signal from the connected equipment. The
beginning of the programme may not be recorded
regardless of whether or not the recorder’s power
is on or off.
• During Synchro-Recording, other operations,
such as normal recording, cannot be performed.
• To use the connected equipment while the
recorder is standing by for Synchro-Recording,
cancel Synchro-Recording by pressing
c
z
SYNCHRO REC. Be sure to turn off the
connected equipment and press
c
z
SYNCHRO
REC to reset Synchro-Recording before the timer
recording starts.
• The Synchro Rec function does not work when
“Line3 Input” of “Scart Setting” is set to
“Decoder” in the “Video” setup (page 88).
• The Synchro Rec function does not work with
some tuners. For details, see the tuner’s operating
instructions.
• While the recorder is standing by for Synchro-
Recording, the Auto Clock Set function (page 86)
does not work.
• To use the Synchro Rec function, you must first
set the recorder’s clock correctly.
If the timer settings of a Synchro-
Recording and another timer recording
overlap
Regardless of whether or not the programme
is a Synchro Rec programme, the programme
that starts first has priority and the second
programme starts recording only after the
first programme has finished.
First
programme
Second
programme
will be cut off
Summary of Contents for RDR-HX520
Page 115: ...115 ...
