Recording on CDR
17
Select
OPTICAL
ANALOG
5
Adjust the recording level (ANALOG IN
only), if necessary. For details, see
“Adjusting the Recording Level” on
page 18.
6
Press
H
.
7
Start playing the sound source you
want to record.
To pause recording
Press
X
. To resume recording, press the button
again or press
H
.
Note
Whenever you pause recording, a new track number
is added. For example, if you paused recording while
recording on track 4, the track number increases by
one on track 5 and recording continues on the new
track when recording is resumed.
To stop recording
Press
x
.
“BUSY”, and then “UPDATE” appear while
updating the information of the disc before
stopping the recording.
Notes
• You cannot operate the CD player section while the
deck is recording or standing by for recording with
“OPTICAL” or “ANALOG” selected with the
INPUT button.
• If you press the REC button during recording, you
can add a track (The track must be longer than 4
seconds).
• Press
X
when the recorder is in standby for
recording to add a silent (around 2 seconds) before
a song you are recording. The recorder
automatically enters standby again.
• This recorder uses the Serial Copy Management
System (SCMS), which allows only first-generation
digital copies to be made of premastered software
via the recorder's digital input. Therefore you may
not be able to record a CD-R or CD-RW digitally
through OPTICAL IN, depending on the content
being record.
z
REC
z
Recording on a CD-R or
CD-RW disc Manually
You can start recording from the end of the
existing material.
When using the remote, set SELECT to CDR
for operations on DECK B.
To perform Synchro-Recording, see
“Recording a CD to CD-R or CD-RW disc at
Normal Speed” on page 14 or “Recording a CD
to CD-R or CD-RW disc at High Speed” on
page 15.
1
Turn on the amplifier and set the
source selector to the position for the
sound source you want to record.
2
Place a recordable CD-R or CD-RW on
DECK B.
3
Press INPUT repeatedly to select the
input connector.
To record through
DIGITAL OPTICAL
ANALOG IN
4
Press REC
z
.
The recorder stands by for recording.