40
RCD-W222ES
4-3. CD-RW Playback Adjustment
1)
Select the menu as follows. Control
→
Macro, and select 03cdr_S.ttl.
Press “Open”.
4
Fig. 4-30
2)
Place the test CD TCD-W091W on the tray as prompted by
the display and press “OK”.
(See Fig. 4-30)
3)
Press the “RESET” button (SW101) of the jig as prompted by the display.
4)
As prompted by the message shown in Fig. 4-32, check that
the waveform as shown in Fig. 4-31 appears on an oscilloscope.
5)
As prompted by the message shown in Fig. 4-34, check that
the waveform as shown in Fig. 4-33 appears on an oscilloscope.
6)
As prompted by the message shown in Fig. 4-36, check that
the waveform as shown in Fig. 4-35 appears on an oscilloscope.
4
Fig. 4-32
RF signal waveform
VOLT/DIV : suitable value
TIME/DIV : 500ns
4
Fig. 4-31
4
Fig. 4-34
RF signal waveform
VOLT/DIV : suitable value
TIME/DIV : 500ns
4
Fig. 4-33
4
Fig. 4-36
RF signal waveform
VOLT/DIV : suitable value
TIME/DIV : 500ns
4
Fig. 4-35