92
• Resetting network settings (p. 98) will delete the
CCM root certificate imported from the memory
card, and will initialize the CCM root certificate
of the camcorder.
Synchronizing the
timecode of multiple
cameras using a
smartphone
When shooting using multiple cameras, you
can synchronize the timecode of each
camera using a smartphone and the
Wireless TC LINK function.
To use the Wireless TC LINK function,
“CBKZ-WTCL” (sold separately) is
required.
After purchasing an option, connect the
camcorder to a computer using USB to use
the auto detect function, and install by
following the instructions on the PC.
b
Note
• A smartphone that supports the tethering
function is required to use Wireless TC LINK.
To determine whether tethering is enabled on
your smartphone, check with your contracted
carrier.
The following preparation is required on
the smartphone used for timecode
synchronization.
1
Install “Content Browser Mobile”
on the smartphone.
For the installation procedure, see
page 75.
2
Set the smartphone to tethering
mode.
For details about configuring tethering,
refer to the instruction manual for your
smartphone.
To use Wireless TC LINK
Preparation on the smartphone
Using NETWORK CLIENT MODE
(Continued)
