Sony PXW-Z450, Operating Instructions Manual

Page: 92 / 159

000
7. Menu Display and Settings: Menu List
92
Operation >Assignable Switch
Assigns functions to assignable switches.
For details about assigning functions, see “Assigning Functions to Assignable Switches” (page 112).
Item Setting Description
<0> 112 Assigns a function to the ASSIGN. 0 switch.
<1> 113 Assigns a function to the ASSIGN. 1 switch.
<2> 112 Assigns a function to the ASSIGN. 2 switch.
<3> 113 Assigns a function to the ASSIGN. 3 switch.
<4> 113 Assigns a function to the ASSIGNABLE 4 switch.
<5> 113 Assigns a function to the ASSIGNABLE 5 switch.
Lens RET 114 Assigns a function to RET button on the lens.
Online 113 Assigns a function to the ONLINE button.
Zoom Speed 0 to 20 to 99 When Zoom has been assigned to the
ASSIGNABLE 4 or 5 switch, this sets the zoom
speed.
Operation >VF Setting
Sets the viewfinder screen.
Item Setting Description
Color –99 to
±0
to +99 Adjusts the color depth of the viewfinder image.
Color Mode Color/ B&W Selects the viewfinder display mode (when using
CBK-VF02).
Color: Color
B&W: Black & white
Peaking Type Normal /Color Selects the type of peaking (when using CBK-
VF02).
Normal: Normal peaking
Color: Color peaking
Peaking Frequency
Normal
/High When Peaking Type is set to Normal, this selects
Normal or High peaking frequency (when using
CBK-VF02).
Peaking Color B&W /Red/Yellow/Blue Selects the peaking color when Peaking Type is
set to Color (when using CBK-VF02).
B&W: Black & white
Red: Red
Yellow: Yellow
Blue: Blue
VF Detail Level –99 to ±0 to +99 Sets the detail level (set on the camcorder) of the
viewfinder (when using HDVF-20A).
Operation >Marker
Sets the marker display in the viewfinder.
Item Setting Description
Setting On /Off Turns the display of all markers on/off.
[Note]
When Marker is assigned to the ASSIGN. 2 switch, this
setting is disabled.
Color White /Yellow/Cyan/Green/
Magenta/Red/Blue
Selects the marker display color.
Center Marker 1/2/3/4/ Off When the center marker is displayed, selects the
type. Select Off if you do not want to display the
marker.
Safety Zone On/ Off Turns the safety zone indicator on/off.
Safety Area 80%/ 90% /92.5%/95% Selects the safety zone range.
Aspect Marker Line/Mask/ Off When an aspect marker is to be displayed, selects
the display method. Select Off if you do not want
to display the marker.
Line: Show as white lines.
Mask: Displays a lower video signal level for areas
outside the marker area.
Aspect Select 15:9/14:9/13:9/
4:3
/1.66:1/
1.85:1/2.35:1/2.4:1
Selects the aspect ratio of the marker.
Aspect Mask 0% to
12%
to 15% When the Aspect Marker setting is Mask, this sets
the video signal level of areas outside the marker
area as a percentage value relative to the video
signal level of areas inside the marker area.
Aspect Safety Zone On/ Off Turns the aspect safety zone marker on/off.
Aspect Safety Area 80%/ 90% /92.5%/95% Selects the size of the aspect safety zone marker
(as a percentage of total screen size).
100% Marker On/ Off Turns the 100% safety zone marker indicator on/
off.
User Box On/ Off Turns the box cursor display on/off.
User Box Width 40 to 500 to 999 Sets the box cursor width (distance from the
center to the left and right edges).
User Box Height 70 to 500 to 999 Sets the box cursor height (distance from the
center to the top and bottom edges).
User Box H Position –479 to 0 to 479 Sets the horizontal position of the box cursor
center.
User Box V Position –464 to 0 to 464 Sets the vertical position of the box cursor center.