000
1. Overview: Screen Display
16
Viewfinder Screen
The viewfinder screen displays images during
shooting (recording or recording standby)
and playback with camcorder information
superimposed on the display.
You can toggle the display of information on/off
using the DISPLAY switch.
The information to display is linked to the settings
in Operation >Super Impose in the setup menu,
and the settings of the corresponding switches.
Proxy
1 2
5 6
8
4
3
7
9
10 11 12
13 14
15 16
17
19
21
23
24
18
20
22
25
28
29
30
31
33
35
37
32
26
27
34
36
1.
Extender indicator
“EX” appears when the lens extender function is
ON.
2.
Zoom position indicator (with lens mounted)
Displays the zoom position of the zoom lens in the
range 0 to 99.
3.
Color temperature indicator
Displays the color temperature of the white
balance.
4.
Focus position indicator (with lens mounted)
Displays the focus position as a distance to the
subject (unit: meters).
5.
Iris position indicator (with lens mounted)
Displays the iris position setting.
6.
Electric color temperature filter indicator
Appears when the CC5600K function is on.
7.
Depth of field indicator (serial lens mounted)
Displays the depth of field using a bar. The units
for display are set using Operation >Display On/Off
>Lens Info in the setup menu, and can be set to
meters or feet.
8.
Recording mode indicator
Displays the following recording operation states
of the camcorder.
Indicator
Meaning
Rec
During recording
Stby
Recording standby
Cont Rec
Clip continuous recording in
progress
Indicator
Meaning
Cont Stby
Recording standby in clip continuous
recording mode
S&Q Rec
Recording in progress in Slow &
Quick Motion mode
S&Q Stby
Recording standby in Slow & Quick
Motion mode
Rec
Recording in picture cache mode
Cache
Recording standby in picture cache
mode
Int Rec
Recording in progress in Interval Rec
mode
Int Stby
Recording standby in Interval Rec
mode
Int Stby
Recording paused in Interval Rec
mode (during pause intervals)
Sml Rec
Recording in progress in Simul Rec
mode
Sml Stby
Recording standby in Simul Rec
mode
CALL
Call received from external
connected device
Green tally is displayed when the camcorder is in
the following states.
ˎ
ˎ
Maintenance >Camera Config >HD-SDI Remote
I/F is set to Green Tally in the setup menu and a
recording control signal is output from the SDI
OUT connector.
ˎ
ˎ
Green tally signal received (when a camera
adaptor is mounted on the camcorder and a
camera extension unit is connected)
9.
Wireless receiver function indicator
Displays “W” when a slot-in receiver is attached to
the camcorder, and displays the reception level
for each channel that can be used by the receiver
(1ch, 2ch, or 4ch).
Normal: Displays the strength of the received
signal level by the number of white segment
indicators.
Analog receiver muting/Digital receiver error rate
warning: Displays the strength of the received
signal level by the number of gray segment
indicators.
If the received level exceeds the peak: Displays “P”
in place of the indicator.
1)
Receiver battery is low: The corresponding channel
number and indicators flash.
1)
1) When using the DWR-S02D
10.
S&Q Motion (Slow & Quick) frame rate
indicator
Displays the shooting frame rate when the
camcorder is set to Slow & Quick Motion recording
mode.
11.
12.
Battery capacity/voltage display
Displays the following indicators according to the
type of battery power source.
Battery type
Indicator
Info battery
Battery remaining capacity
icon and remaining recording
time
Anton/Bauer
battery
Remaining battery capacity (%
indicator)
Other batteries
Input voltage
13.
Recording format (picture size) indicator
Displays the picture size of clips recorded onto SxS
memory cards.
14.
Recording format (system frequency and
scan method) indicator
Displays the currently configured camcorder
system frequency and the recording format scan
method.
15.
Recording format (codec) indicator / 1-slot
Simul Rec indicator
Displays the format name of clips recorded onto
SxS memory cards.
“/Sub” is displayed in 1-slot Simul Rec mode
(page 50).
16.
Gamma indicator
Display the gamma setting.
